g
Printer Friendly Version

editor  
BellaOnline's Beadwork Editor
 

Washer Bracelet

Copper Washer Bracelet

Copper is becoming increasingly popular because of the high cost of other metals. It's a favorite because you can use lots of techniques with it, it looks wonderful with colors like red or turquoise blue and it looks a lot better than plated metals for casual jewelry.

Copper washers and wire are available at hardware stores very inexpensively. This bracelet works up very quickly.

You will need:


Optional supplies include things like texturing hammers or a ball hammer if you want to add texture to the washers, and an oxidizing agent like Liver of Sulfur.

This bracelet uses a small washer size and a medium sized washer, however, you can use the sizes you like. Arrange washers and beads in a line to decide how you want you bracelet to look. I used a very simple arrangement of alternating large and small with beads in the large ones.

Mark your washers with the permanent marker. For the large ones, I marked 4 spots equidistant from each other. For the small, only 2 sides. Just draw straight down the middle of the washers to make the marks.
washer marking placement
Drill or punch the holes. If you're using a drill, use small bit. For the punch, you'll use the 1.6mm side, which is the smaller side. The ink will wipe off fairly easily. If it's stubborn, use the alcohol to help remove it.
washer holes
Now cut a 2 inch piece of the 24 gauge wire, and wire the beads in place on the larger washers. I found it was easier working from the outside of the washer rather than the inside. Wrap the wire, trim close and tighten the wire with the pliers.
washer with bead

Make jump rings using the 18 gauge wire around your mandrel. The pliers are helpful here because the wire can be hard to turn around something that small, but it does make fairly strong jump rings. Cut them apart carefully with the wire cutters. Link your washers together, and add a clasp.

Using these techniques, all sorts of looks are possible, you can hammer or stamp the washers for interest, or instead of linking them together as a bracelet, you can link them on a necklace, or you could make a wonderful statement necklace by linking together panels of beaded washers.

Punch and Washers in the U.S.A.

Punch and Washers in the U.K.

Affiliate links in an article provide extra income to me personally. I provide them both as a service and as a way to help fund my own book addiction.

Beadwork Site @ BellaOnline
View This Article in Regular Layout

Content copyright © 2013 by Shala Kerrigan. All rights reserved.
This content was written by Shala Kerrigan. If you wish to use this content in any manner, you need written permission. Contact Shala Kerrigan for details.



| About BellaOnline | Privacy Policy | Advertising | Become an Editor |
Website copyright © 2014 Minerva WebWorks LLC. All rights reserved.


BellaOnline Editor