Arizona - 12" Quilt Block
The next block in our State tour is named for the state of Arizona.
Cut one 4-1/2" square.
Cut ten 2-7/8" squares.
Cut ten 2-7/8" squares, four 2-1/2" squares, and four 2-1/2" x 4-1/2" rectangles.
Step 1: With a pencil (or your favorite marking method), draw a diagonal line from corner to corner on the wrong side of each tan 2-7/8" square.
Step 2: With right sides together, layer a tan 2-7/8" square on a red 2-7/8" square. Sew a 1/4" seam on EACH side of the diagonal line that you drew in Step 1. Cut apart on the drawn line and press the seam allowance toward the darker fabric. Trim points. Repeat nine times more for a total of twenty tan/red half square triangles.
Step 3: Sew two tan/red half-square triangles together as shown below. Do this twice to make two tan/red side units.
Step 4: Arrange the tan/red half-square triangles, tan/red side units, tan squares, tan rectangles and brown square as shown in Diagram 1. With right sides together and using a scant 1/4" seam, sew together to form rows as shown in Diagram 2. Sew rows as shown in Diagram 3 to finish the block.
Your block should measure 12-1/2" on all sides. It will measure 12" finished size when it is sewn into a quilt.
Quilting Site @ BellaOnline
View This Article in Regular Layout
This content was written by Kim Noblin. If you wish to use this content in any manner, you need written permission. Contact Judie Bellingham for details.
Website copyright © 2013 Minerva WebWorks LLC. All rights reserved.