Ico Walkthrough
Water and Wheels
Note that from this point forward you do NOT have the girl and there is NO save points. If you die you'll restart at the last idol gates you went through (you shortly will be able to open them yourself) but other than that you're sort of stuck.
OK you're on a hanging circle thing. Jump from circle thing to circle thing until you get to the rock ledge. Go left and in upstream. You'll see 3 waterfalls. Pull the lever to lower the chain. Push the block into the water. Pull it to the ladder and climb up. Pull the lever to open the water gate. Jump in the ater and push the crate with you to the chain. Climb up it.
Push the machinery to the end of the track. It starts the wheel spinning. Climb on the wheel spoke and jump off on the cross beam. Jump up the stone to the pipe. Cross the pipe, jump down at the break. Cross the thick pipe, up on the pipe around. Jump across the mesh. Jump from chain to chain. Now jump across the spinner circles an dthe log roll spinner. Go left.
Go down the rock in the path, along the left. Then back to the left (the camera rotates) and jump across the gap. Jump up on the ledge, down to the lower ledge. Down 3 levels, jump across. Go across the ledge to the big pipe. It's very long.
Follow it into the hole, to the chain. Swing to the ledge. Go right and left, jump the gap, jump up to the chain holder. Push to the outer area, now jump on chain and jump to lower outer ledge. Go around left. 2 little jumps then down the ladder. Jump backwards to the ledge, down the long ladder to the idol doors and a regular door. Go through the regular one.
Ico Walkthrough
Please swing by my
Forum to ask me how to get through if you're stuck somewhere I haven't put up yet. I'll get back to you quickly.
Review of Ico
<%
'TRAFFIC'
Dim objCmd4
Set objCmd4 = Server.CreateObject ("ADODB.Command")
SQLTxt = "update traffic set hit_count = hit_count + 1 where " & _
"site_id = 283 and page_id = 63 ;"
objCmd4.ActiveConnection = strConnect
objCmd4.CommandType = &H0001
objCmd4.CommandText = SQLTxt
objCmd4.Execute intRecords
Set objCmd4 = Nothing
%> |