#### Spring Bracelet by Dagmar Pezzuto

Spring Bracelet by Dagmar Pezzuto

SPRING BRACELET By Dagmar Pezzuto- 2019 ©

ABBREVIATIONS

DS = double stitch

R = ring

SR = square ring

DP = Daisy picot

CH = chain

+ = join

- = picot

Clr = close ring

CTM = continuous thread method 2 shuttles or 1 double shuttle

RW = Reverse work

Note: If you save the diagram/photo to your computer, you may enlarge it to make it easier to read.

ROUND 1

SR1 = 7DS ¡V 7DS ¡V 7DS ¡V 7DS Clr. RW

CH1 = 9DS ¡V 1DS ¡V 11DS

DP = 5DS ¡V 5DS Clr, ( 6 x ) Clr. RW

CH2 = 11DS ¡V 1DS ¡V 9DS

SR2 = 7DS ¡V 7DS ¡V 7DS ¡V 7DS Clr

Repeat to the desired length.

CH9 = 12DS ¡V 12DS

ROUND 2

SR6 = 7DS ¡V 7DS - 7DS - 7DS Clr RW

CH10 = 9DS + ( Insert a bead in the picot of CH8 ) 1DS + (Insert a bead in the picot of CH8) 11DS

DP = 7DS ¡V 7DS ¡V 7DS ¡V 7DS Clr. RW

Repeat until the length of the bracelet is complete

CH18 = 12DS ¡V 12DS + (SR1)

Cut & TIE

ROUND 3

Insert a bead into the SR1 picot and join the thread using the CTM.

CH1 = 12 DS + (Insert a bead into the 3rd petal DP )

CH2 = 6DS + (Insert a bead into the 4th petal DP )

CH3 = 12DS + (Insert a bead into the SR2)

Repeat until the SR10

CH13 = 12DS + (Insert a bead into the SR10) ¡V

CH14 = 18DS + (Insert a bead into the CH9) ¡V

CH15 = 18DS + (Insert a bead into the SR6) ¡V

CH16 = 12DS + ( SR1)

Repeat until the length of the bracelet is complete.

Wear a twisted cord or 3 small clasps to close the bracelet.

DAISY PICOT

Double Bobbin Shuttle

Square ring in progress from Christian Eichler's tutorial.

Review: SQUARE RING

Depending on the font your computer uses to show this pattern you might see a symbol such as "iV." If so, it means to make a picot, "-".

Related Articles
Editor's Picks Articles
Top Ten Articles
Previous Features
Site Map