Colorful Picnic Accessories

Colorful Picnic Accessories
With the arrival of warmer weather, thoughts go to outdoor barbeques or picnics in the park. Easy to sew picnic items bring color, fun and function to any al fresco dining.

A few to consider:

Bandana Table Runner - red, white, and blue color bandanas make for a patriotic theme or choose a different color scheme. Bandanas come in a rainbow mix of colors. Stitch two rows of bandanas along their side seams, four to a side. Generally, eight bandanas can make the table runner. Back the table runner with a complementary solid or printed fabric piece. Stitch the two rows of assembled bandanas onto the backing fabric piece. Pink or serge the edges.

Pocket Place Mat – a picnic place mat with pockets for flatware. Add grosgrain ribbon ties to one end to make it a space saving roll up. Approximately 1 and 1/2 yards will make four placemats with pockets. Cut eight rectangles approximately 13” x 18” and four pockets approximately 7” x 10”. To make one placemat, place two rectangles right-sides facing and stitch in a 1/2” seam all around leaving an opening for turning. Trim seam, clip corners, turn right sides out, press. Insert two 12” ribbon ties 1/2” into the opening and stitch closed. Top stitch all around. To make flatware pocket first fold pocket right-sides out so it is now 7”x 5” and the fold will be the pocket top. Pink or serge raw edges. Stitch three finished sides to one corner of the placemat. Stitch two vertical rows through all layers from the pocket top to pocket bottom to make flatware sections.

Covered Casserole or Pie Carry Tote – One-half yard each of two coordinating print fabrics or a combination of a print and solid, one-half yard of cotton batting and two metal rings make the super simple casserole or pie tote. Cut two 18” x 18” out of fabrics and one of batting. Layer the three together – batting on the bottom, fabrics right-sides facing each other. Stitch around all sides, leaving an opening for turning right-sides out. Trim seams, clip corners, turn right-sides out, press. Stitch opening closed. Quilt a few lines diagonally or in any pattern to secure the layers. To make the carry handle, cut fabric piece 6” x approximately 22”. Fold long edges lengthwise into thirds. Stitch down the long sides to secure. An option to make the carry handle sturdier - stitch a wide piece of webbing down the center of the handle. Attach metal rings at two opposing corners by turning a corner over a ring and stitch securely. Sew carry handle ends to remaining opposing corners. To use, cover dish with plastic wrap or aluminum foil to protect contents. Place dish under carry handle, centered on square. Thread strap to poke through the rings, forming a loop-like handle. Best to place one hand under the covered casserole/pie to steady when carrying.

Reusable Bowl Covers – make for a pretty presentation on a picnic table but will still require the dish to be covered with plastic wrap or aluminum foil under the cover. With the bowl upside down on the fabric, cut a circle 2” wider than the bowl all around. Trim with pinking shears or serge the edges to prevent fraying. Fold over the finished edge about 1/2” to the wrong side of the fabric and stitch close to the finished edge leaving an opening to insert 1/4“ wide elastic. Pull elastic tight around the bowl for an exact measurement. Stitch elastic ends to secure.

Picnic Tote – made from a laminate cotton or sturdy duck cloth to carry all for outdoor dining. Generally, 1/2 yard of sturdy fabric, 1/2 yard for a lining and the same for iron-on interfacing is needed. Sturdy webbing for carry straps can be used for handles. (Note: The tote can be made any size desired.) General directions: Cut inner and outer fabric into two 18” x 20” pieces and two of interfacing. Iron on interfacing to wrong side of outer fabric rectangles. Then stitch both together on three sides, right-sides facing, using a 1/2” seam allowance leaving one 18” side unstitched for the top opening. Sew the inner lining fabric the same way. Slip lining into the outer fabric so that wrong sides are facing and the outer fabric faces outside and the right side of the lining is visible inside the tote. Fold under top edges together to the inside in a 1/2” seam and stitch all around. Stitch webbing to the totes' top edges securely. To make the tote with boxed corners, turn the tote with the lining on the outside and the outer fabric on the inside. Pinch one corner seam at the bottom into a 2” triangle and stitch across. Stitch the opposite corner in the same way. Trim seam, then turn right-sides out.

Enjoy the warm lazy days of summer!

No Sew Table Runner and Placemats from diynetwork.com

Easy-To-Sew Lined Tote Bag found on HGTV.com

Sew happy, sew inspired.






RSS
Related Articles
Editor's Picks Articles
Top Ten Articles
Previous Features
Site Map







Content copyright © 2018 by Cheryl Ellex. All rights reserved.
This content was written by Cheryl Ellex. If you wish to use this content in any manner, you need written permission. Contact Cheryl Ellex for details.