007 Nightfire Walkthrough:
You have to infiltrate a nuclear power plant. From the start just run to the back of the roof. Laser off the four corners of the grate to go in for a 007 moment. You're in the first building. Kill the guys in here, then take a picture of the jet-suit (hold in L1 to use the camera). Now you have to go into the second building.
Go down tot he lower level and out the door. Head right, around the back and then go slowly and take out the snipers from under cover. When you've got them taken care of, go to the closest tower and up the ladder. Go around to the back. Jump up to the wire and move across. Around to the left is armor.
Take another 2 short wires to get to the middle building. Shoot the enemies in here and go upwards, jumping over a box pile. Go across the metal spike across the center of the room and over to the door. Now you're in the next area.
There's an armor right here and also down in the rubble to the right. Keep an eye out for the sniper and take them out one by one. When you've gotten them all, go to the center structure and climb the ladder up. It's a LONG wire across to the building so be sure all the snipers are taken care of. There's a button here. Press it and then jump on the crane arm and run to the end. Now you go through the door.
There's armor here. Note there's a grapple spot but it's not worth going over.
Now you're in the control room with tons of enemies. Hit the button to get a big yellow beam moving across. Grapple up to it, watching the timing for a 007 moment. Get to the far side and see the laser images. Take a picture of it. If you go in the door at the far end there are bad guys and armor. Now go up to the catwalk to the gun between the two blinking lights. This is the laser. Use it to zap everybody and then zap the door to get it open. Head out that big C5 door you opened to end the level. You run into Kiko, who it turns out is bad. She darts you.
* Lasering four corners of grate
* Jumping on moving beam
007 NightFire Walkthrough, Tips and Techniques
Set objCmd4 = Server.CreateObject ("ADODB.Command")
SQLTxt = "update traffic set hit_count = hit_count + 1 where " & _
"site_id = 283 and page_id = 128 ;"
objCmd4.ActiveConnection = strConnect
objCmd4.CommandType = &H0001
objCmd4.CommandText = SQLTxt
Set objCmd4 = Nothing
PS2 / PS3 Reviews
Nintendo DS Reviews
PC Game Reviews
Video Games and Child Soldiers
Women in Armor
Free Dating Tips