Christmas Star Quilted Tablerunner Pattern

Christmas Star Quilted Tablerunner Pattern

Christmas Star Quilted Tablerunner

Finished Size:  15-1/2" x 45-1/2"

Block Size:  12"

 

Fabric Requirements:

  • 1/2 yard dark green fabric (Fabric 1)
  • 1/2 yard light green fabric (Fabric 2)
  • 5/8 yard red fabric (Fabric 3)*
  • 1/2 yard tan fabric (Fabric 4)
  • 20" x 50" rectangle for backing
  • 20" x 50" of batting

*This amount includes enough fabric to cut 2-1/2" strips for binding.

Fabric Key:

Cutting Instructions:

 

 

  • Cut 6, 3-1/2" squares
  • Cut 6, 3-7/8" squares
  • Cut 2, 2-1/2" x 14-1/2" rectangles

 

 

  • Cut 6, 5-1/4" squares and cut each one once diagonally to make 12 triangles

 

 

  • Cut 12, 3-7/8" squares and cut each one once diagonally to make 24 triangles
  • Cut 8, 1-1/2" squares
  • Cut 4, 2-1/2" x width of fabric strips for binding

 

 

  • Cut 6, 3-1/2" squares
  • Cut 6, 3-7/8" squares
  • Cut 10, 1-1/2" x 12-1/2" strips for sashing

Sewing Instructions:

Step 1: Using a pencil (or your favorite marking method) and a ruler, draw a diagonal line from corner to corner on the wrong side of all Fabric 4 (Tan) 3-7/8" squares.

Step 2: Place a marked Fabric 4 (Tan) 3-7/8" square on a Fabric 1 (Dark Green) 3-7/8" square, right sides together.  Sew a 1/4" seam on BOTH sides of the marked line.  Cut apart on the marked line and press seam allowance toward the darker fabric.  Trim points.  Repeat five more times for a total of 12, Fabric 1/Fabric 4 half-square triangles.

Step 3: With right sides together, sew a Fabric 3 (Red) triangle to one short side of a Fabric 2 (Light Green) triangle.  Press seam allowance toward the Fabric 2 (Light Green) triangle.  Sew a Fabric 3 (Red) triangle to the remaining short side of the Fabric 2 (Light Green) triangle.  Press seam allowance toward the Fabric 2 (Light Green) triangle.  Repeat 11 more times for a total of 12 flying geese units.

Step 4: With right sides together, sew the Fabric 1 (Dark Green) 3-1/2" squares and the Fabric 4 (Tan) 3-1/2" squares together to make 3 four-patch units.

Step 5:  Arrange the block sections as shown below and sew into rows (Diagram 1).  Sew the rows (Diagram 2) together to finish the block (Diagram 3) .  Repeat 2 more times for a total of 3  Christmas Star blocks.  The blocks should measure 12-1/2" at this point.

Diagram 1:

Diagram 2:


Diagram 3:


Step 6:  Sew Fabric 4 (Tan) 1-1/2" x 12-1/2" sashing strips to the blocks as shown below.  Press seam allowances toward the Fabric 4 (Tan) sashing strips.

Step 7:  Sew Fabric 4 (Tan) 1-1/2" x 12-1/2" sashing strips and Fabric 3 (Red) 1-1/2" squares together as shown below.  Press seam allowances toward the Fabric 4 (Tan) sashing strips.  Make 2.

Step 8:  Sew the strips made in step 7 to the top and bottom of the tablerunner as shown below.  Press seam allowances away from the Christmas Star blocks.

Step 9:  Sew the Fabric 1 (Dark Green) 2-1/2" x 14-1/2" strips to the left and right sides of the tablerunner as shown below.  Press seam allowances toward the darker fabric.

Your Christmas Star Tablerunner is now pieced!

 

Your tablerunner should now measure 14-1/2" x 44-1/2" inches.  After the binding is attached is will measure approximately 15-1/2" x 45-1/2". Use your favorite method to quilt and bind your tablerunner.





RSS
Related Articles
Editor's Picks Articles
Top Ten Articles
Previous Features
Site Map





Content copyright © 2023 by Kim Noblin. All rights reserved.
This content was written by Kim Noblin. If you wish to use this content in any manner, you need written permission. Contact Judie Bellingham for details.