Rings Galore Bracelet Vicki Clarke
Rings Galore Bracelet Vicki Clarke 2018
Materials
Size 20 thread in 2 different colors
2 shuttles or tatting needle and ball of thread
Terms
SSSR - single shuttle split ring(1). Shuttle to be used is indicated by number, shuttle 1 or shuttle 2
SR - split ring, which is notated by 5-5/5-5. The number on the left is the core thread, shuttle 1; the number on the right is the wrapped thread, shuttle 2
+ join
p - picot
C - Chain
Wind 2 shuttles with 2 different colors. Label them shuttle 1 and shuttle 2
SR 5-5 / 5-5
* Shuttle 1
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 2
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 1
SR 5-5 / 5-5*
Repeat from * to * for length desired. In this sample I tatted 4 repeats then:
Shuttle 2
C 12
SR 5-5 / 5-5
* Shuttle 2
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 1
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 2
SR 5-5 / 5-5*
Repeat from * to * for length then finish with
C 12 join back to first split ring.
(1)The single shuttle split ring (sssr) creates the same effect as a split ring. However, the true split ring requires two shuttles to create it. If only one shuttle is available this sssr makes it possible.
A line of one or more rings is tatted but they are only partially closed. The last ring in the row is a complete ring which brings the shuttle down in a position to begin wrapping the ds on the bare thread of the unfinished rings.
Materials
Size 20 thread in 2 different colors
2 shuttles or tatting needle and ball of thread
Terms
SSSR - single shuttle split ring(1). Shuttle to be used is indicated by number, shuttle 1 or shuttle 2
SR - split ring, which is notated by 5-5/5-5. The number on the left is the core thread, shuttle 1; the number on the right is the wrapped thread, shuttle 2
+ join
p - picot
C - Chain
Wind 2 shuttles with 2 different colors. Label them shuttle 1 and shuttle 2
SR 5-5 / 5-5
* Shuttle 1
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 2
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 1
SR 5-5 / 5-5*
Repeat from * to * for length desired. In this sample I tatted 4 repeats then:
Shuttle 2
C 12
SR 5-5 / 5-5
* Shuttle 2
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 1
SSSR 5/5
SSSR 5/5
SSSR 5/5
Switch to shuttle 2
SR 5-5 / 5-5*
Repeat from * to * for length then finish with
C 12 join back to first split ring.
(1)The single shuttle split ring (sssr) creates the same effect as a split ring. However, the true split ring requires two shuttles to create it. If only one shuttle is available this sssr makes it possible.
A line of one or more rings is tatted but they are only partially closed. The last ring in the row is a complete ring which brings the shuttle down in a position to begin wrapping the ds on the bare thread of the unfinished rings.
Related Articles
Editor's Picks Articles
Top Ten Articles
Previous Features
Site Map
Content copyright © 2023 by Georgia Seitz. All rights reserved.
This content was written by Georgia Seitz. If you wish to use this content in any manner, you need written permission. Contact Georgia Seitz for details.