Quilt Blocks of the States - Utah
The next block in our State Quilt Block Series is Utah This block is a bit tricky but with patience, it will make a fantastic quilt. There are “curved seams” in this block and I have linked to a good set of instructions to sew curved seams. Perhaps you can take the time to do a practice piece with curved piecing before you commence the Utah block
To go to the curved seam instructions Click here.
To print out the templates for D&Dr templates Click here.
It may take a little while to download the PDF of the templates, please be patient.
White: Cut one x A template (allow seam allowance on all templates)
Blue: Cut four x C templates (allow seam allowance on all templates)
Red: Cut four x D templates (allow seam allowance on all templates; Cut four x E templates (allow seam allowance on all templates)
Step 1: Piece one template B to one template E. Repeat this for the other three BE units.
Step 2: Sew a BE unit to each side of a C template. Repeat this for the other three BE units.
Step 3: Sew one D template to the A template. Repeat this for the other three D templates.
Step 4: Join the DA unit to each edge of the BEC units. Repeat this step for the other three sides.
Congratulations, your block should measure 12-1/2" on all sides. It will measure 12" finished size when it is sewn into a quilt.
You Should Also Read:
Quilt Blocks of the States Series
Editor's Picks Articles
Top Ten Articles
Content copyright © 2023 by Judie Bellingham. All rights reserved.
This content was written by Judie Bellingham. If you wish to use this content in any manner, you need written permission. Contact Judie Bellingham for details.