Draft Stoppers for Door or Window

Draft Stoppers for Door or Window
A draft stopper also known as a draft excluder is usually a round tube of fabric stuffed firmly with a granular filling placed at the bottom of a drafty door or window ledge. Fillings like clean sand, crushed walnut shells or natural buckwheat hulls allow the draft stopper to lie close to the bottom and edges of a door or window ledge and keep out the pesky drafts. The weight of the filling keeps the draft stopper in place.

Easy to sew using a cheerful calico print, wool plaid, corduroy or even denim for a country-look. Old jeans pants legs, knee-high socks, upholstery fabrics or no-longer used sweaters also make for charming draft stoppers.

To make the draft stopper two fabrics are needed, choose one for the outer fabric and the another for the inner lining (plain muslin or an old pillow case works well). The lining works to keep the sand or litter from migrating through the fabric. Cut each about 9-inches by 40-inches long. The fabric and lining will be stitched separately. Fold each piece in half lengthwise, right sides together and sew a 1/2-inch seam across one short end and along the long side opposite the fold. Turn the outer fabric right side out and press. Sew the inner lining fabric the same way. Insert the lining tube into the tube of fabric so it nestles all the way in. A yardstick or broom handle can help insert the lining. Use a funnel to pour clean sand or other fillings into the nested tubes stopping about 2-inches from the open end. Hand-stitch closed both the lining end and the fabric end separately.

Decorate if you wish, the now utilitarian draft stopper by attaching stitched and poly-stuffed barnyard or favorite animal shapes like sheep, geese, dog or cat. Holiday or themed shapes like snowmen, clouds, stars and moon, or simple pine tree and leaf shapes are charming as well. Large cookie cutters or shapes traced from children’s coloring books make great template shapes to use. Cut two of each shape, stitch right-sides together - leave an opening for turning - clip across corners and curves then turn right-side out and stuff firmly. Hand stitch the opening closed then use a few hand stitches to attach to the draft stopper or simply glue on the shapes.

The same type fabric and filler used to make the draft stopper can also be used to make a coordinating no-sew door stop. Fill a clean small-size coffee can (with lid) with clean sand or even unused clay litter. The plastic lid of the coffee can should be taped securely to the can using study masking or duct tape. Cut a piece of fabric 22-inchesby 18-inches or larger if necessary. Set the coffee can in the center of the fabric and hand fold or softly bunch together the fabric edges up and around completely enclosing it. Hot glue or tape the gathers flat on the top of the can or leave gathers as is and secure with twine or ribbon. Place a matching stitched, stuffed shape on top by gluing in place for a coordinating door stop to the draft stopper.

When the cool winds blow a cheery draft stopper for a door or window ledge can keep out those chilly drafts and add some whimsical drama to the rather utilitarian but practical form.

Sew happy, sew inspired.





RSS
Related Articles
Editor's Picks Articles
Top Ten Articles
Previous Features
Site Map







Content copyright © 2019 by Cheryl Ellex. All rights reserved.
This content was written by Cheryl Ellex. If you wish to use this content in any manner, you need written permission. Contact Cheryl Ellex for details.